Microplex SOLID 60E-2 Operator's Manual page 100

100 Operator Maintenance
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
8. Clean the housing of the main charger using the blower brush.
9. Turn the charger round and clean the wires from its reverse
side using the wire cleaning tool. After this process the wires
should be completely smooth.
10. Reassemble the grid to the main charger (compare item 4).
11. Replace the main charger in its original position and tighten
the knob screw.
12. Close the printer's front cover.
Operator's Manual SOLID 60E-2 Edition 2.1