Cleaning The Transport Unit - Microplex SOLID 60E-2 Operator's Manual

_______________________________________________________________________________________________

6.2. Cleaning the Transport Unit

________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
1. Turn off the SOLID 60E-2 printer and pull the power plug.
Make sure, the printer has been switched off for at least
15 minutes before you start cleaning the device.
2. Open the front cover of the printer.
3. Open the waste toner unit (compare previous section).
4. Press down the green lever of the transport unit. The
transport path is set down by that.
5. Press down the lever while pulling the transport unit
towards you to avoid damaging the printer. Pull the unit
until it stops.
Green lever
Operator's Manual SOLID 60E-2
Printer Cleaning
Edition 2.1
91