Table of Contents
Advertisement
102
Operator Maintenance
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
4. Place the charger onto a clean and level worktop.
5. Using the blower brush, remove paper dust and other
unwanted particles.
6. Clean the wire using the wire cleaning tool. After having
finished this procedure the wire should be completely smooth.
7. Replace the charger in its original position and fasten
the knob screw to secure the charger.
8. Close the waste toner unit.
Make sure the bar has engaged.
9. Close the printer's front cover.
Operator's Manual SOLID 60E-2
Edition 2.1
Advertisement
Table of Contents
Need help?
Do you have a question about the SOLID 60E-2 and is the answer not in the manual?