Selection Of Memory Distribution (Input Buffer) - Microplex SOLID 60E-2 Operator's Manual

_______________________________________________________________________________________________

5.17. Selection of Memory Distribution (Input Buffer)

ON LINE
SAVE
SAVE
SAVE
MENU SAVE
ON LINE
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
This function enables the user to choose the distribution of the
available RAM memory between input buffer and macro/download
memory.
Panel display
[SOLID 60E-2 ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Input Buffer ]
[32 kB ]
  
[100 kB ]
[Save as Setup? ]
Operator's Manual SOLID 60E-2
Panel Functions
Notes
Turn the printer OFF LINE with this key.
Press one of the ARROW keys until
[Configuration ] is displayed.
Press one of the ARROW keys until
[Input Buffer ] is displayed.
Press one of the ARROW keys until the
desired memory distribution is
displayed. The input buffer size is
specified in kilobyte (kB) or in percent
of the installed memory.
100 kB is selected as input buffer.
In addition this new value can be
saved as setup value (using the SAVE
key), before the printer is turned ON
LINE again.
69
Edition 2.1