_______________________________________________________________________________________________
8.3.3. Paper Jam within the Power Stacker
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
There are different kind of troubles possible within the power
stacker (see section 8.2.1: Error codes , too). Frequently the folding
of the paper has not worked right and so a paper jam might result.
Press the table down switch to lower the paper table. Then shift the
paper table up to remove the flaw.
Sometimes it is also necessary to remove the paper from the stacker
or refinish the folding at the perforation and file the paper by hand.
This error described above is displayed by the message
[STACK ERROR!
[E0055
Please inform your service engineer if there are any troubles
different from the one above.
Operator's Manual SOLID 60E-2
Troubleshooting
]
]
143
Edition 2.1
Need help?
Do you have a question about the SOLID 60E-2 and is the answer not in the manual?