Microplex SOLID 60E-2 Operator's Manual page 41

_______________________________________________________________________________________________
Switching the Printer OFF LINE
[SOLID 60E-2 ]
ON LINE
[Menu Level 1 ]
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
After the printer was turned on (and as soon as the warm up phase is
finished) the printer goes into the ON LINE – Mode.
The display of the control panel shows the name of the printer.
This symbol shows the ON/OFF LINE key. If the printer is turned
OFF LINE with this key you get automatically into the first menu level.
Now this message is shown by the display of the control panel.
In the interest of simplicity, in the following chapters only the most
important display messages are shown in the Panel display column.
Operator's Manual SOLID 60E-2
Operation and Menu Structure 41
Edition 2.1