Microplex SOLID 60E-2 Operator's Manual page 112

112 Operator Maintenance
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
5. Please make a potential compensation (grounding) between
the developer unit and the printer cabinet before you
exchange the developer powder (vacuum). The grounding
has to be connected to the back fastening screw (B) of the
cover.
Back fastening screw (B)
Screw ( B )
Cleaning brush
6. Remove the developer - toner mixture completely out of the
developer tub (see figure at the beginning of this section)
using an anti-static service vacuum cleaner.
Clean also the developer roll while turning it counterclock-
wise (roll knob F).
Operator's Manual SOLID 60E-2
Screws (B)
Developer unit
Cover (C)
Dip (vacuum, refill)
Roll knob ( F )
Cover ( C )
Developing roll ( J )
Sealing welt
Edition 2.1