Setting To Factory Default - Microplex SOLID 60E-2 Operator's Manual

70 Panel Functions
_______________________________________________________________________________________________

5.18. Setting to Factory Default

ON LINE
SAVE
SAVE
MENU SAVE
ON LINE
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
This function back-outs all configurations to factory defaults.
Panel display
[SOLID 60E-2 ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Factory Default ]
[Save as Setup? ]
Operator's Manual SOLID 60E-2
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Configuration ] is displayed.
Press one of the ARROW keys until
[Factory Default ] is displayed.
Only if you press the SAVE key a
second time the configuration will be
back-outed to factory defaults.
The printer is turned ON LINE
again.
Edition 2.1