Emulation Selection - Microplex SOLID 60E-2 Operator's Manual

_______________________________________________________________________________________________

5.14. Emulation Selection

ON LINE
SAVE
SAVE
SAVE
MENU SAVE
ON LINE
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
With this function you can change the active emulation.
Panel display
[SOLID 60E-2 ]
[Menu Level 1 ]
  
[Configuration ]
[Interface]
  
[Emulation ]
[SOLID Standard ]
  
[HP PCL 5 ]
[Save as Setup? ]
Operator's Manual SOLID 60E-2
Panel Functions
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Configuration ] is displayed.
Press one of the ARROW keys until
[Emulation ] is displayed.
Press one of the ARROW keys
until the desired emulation
(e.g. HP PCL 5) is displayed.
The emulation HP PCL 5 is selected.
In addition this new value can be
saved as setup value (using the
SAVE key), before the printer is
turned ON LINE again.
65
Edition 2.1