Auto Set Relocate: Temporary - Tadiran Telecom T200M Series User Manual

Auto Set Relocate: Temporary

When defined for temporary relocation, this feature allows a temporary move of your extension from one location to another,
while preserving your extension's original setup. The Auto Set Relocate function enables you to access customized features of
your phone from another phone. By activating the feature you can relocate all of your (source) phone's programmable keys,
numbering, membership in groups, etc. to another (destination) phone located elsewhere within the same Coral system. As
this takes place, the source phone acquires the full profile of the destination phone, and vice versa.
The Auto Set Relocate is activated at the destination station. The temporary phone swap is automatically reversed at
midnight. Reactivating Auto Set Relocate at the already swapped destination station causes:
• Automatic cancellation of the first relocation
• Exchange of the new (third user's) phone profile with the destination phone profile
Activating from the Destination (new) location:
[fSet] [Move] [ACD] [Move]
1. Select or
2. Dial your (source) station number.
3. Enter your (source) passcode (four digits).
4. Dial the activation code
5. The station now initializes with the source profile.
Canceling from the Destination (new) location:
[fSet] [Move] [ACD] [Move]
1. Select or
2. Dial your (source) station number.
3. Enter your (source) passcode (four digits).
4. To cancel, dial the cancellation code
5. The station now initializes with its original profile.
Station Telephony Features
Auto Set Relocate: Temporary
.

.
.

.
73 T200M Series User Guide (Coral IPx / FlexiCom)