Tadiran Telecom T200M Series User Manual page 39

Fixed Feature Key
T208M/BL T207M, T207M/NP, T208M
DIR
/ DIR
HEADSET
/ HEADSET
XFER
/ XFER
REDIAL
/ REDIAL
HOLD
/ HOLD
MUTE
/ MUTE
SPKR
/
SPKR
Operating the Phone
Using the Fixed Function Keys
Used to search and place calls from the Shared and Personal directories.
"Directory" on page 101.
Used to activate/deactivate
mode is activated. See "Headset Only" on page 136.
While engaged on a call you can activate a feature by pressing the Transfer key.
When using Transfer, a special distinctive dial tone is heard, enabling you to either
transfer the call, or activate a feature. Transfer puts the second party on Hold and
provides one of the following: music, ring-back tone, busy tone or no sound at all,
as defined system-wide. See "Transfer (Xfer)" on page 206.
Used to redial the last number (most recent number) dialed from this phone.
"Redial" on page 188.
The Hold key is used for placing a party on Hold while another call is made or
received. The held party can hear one of the following: music, ring-back tone, busy
tone or no sound at all, as defined system-wide.
Used to activate/deactivate the voice transmit from this phone. A red LED
indicates that the Mute feature in on. (see
The Speaker key is used to converse hands-free. When conversing through the
speaker, voice volume can be adjusted. Volume of call monitoring, paging, etc. can
also be adjusted by using the volume control key. A green LED is associated to
indicate its status. See page 27
25
Description
Headset
mode. A green LED indicates that
See "Hold" on page 139.
Mute Microphone on page
and page 32.
T200M Series User Guide (Coral IPx / FlexiCom)
See
Headset
See
163).