Station Setup Features - Tadiran Telecom T200M Series User Manual

Station Setup Features

The Station Setup Features menu allows an attendant to define stations for specific feature activation. Some of these features
operate permanently, or until redefined. Other features operate on a one-time basis; after the feature is activated, it is then
cancelled and must be redefined or reactivated in order to operate again.
[sSet]
Press to access the Station Setup Features.

[ChkO]
Check In/Check Out enables certain activities to be performed automatically (primarily used for rooms/
stations). These are: Room Block/Unblock, Charge Print, Canceling Existing Messages and Terminating
DND. Additionally, if defined system-wide, Wakeup and Call Forward are cancelled and Charge is reset. In
some systems (defined system-wide) this feature can be activated only on idle stations. If an attempt is made
to activate the feature on a busy station, the

[DND]
Do Not Disturb (DND) is used to activate Do Not Disturb for a station or Boss Group. A caller to this station
will hear a reorder tone, and only a station with DND override is able to call that station.

[HotD]
Hot Station Delay is used to program a telephone to ring another station, automatically connect to a paging
device, or automatically dial out when the handset is taken off-hook, or
are dialed within the programmed first digit time-out. Possible destinations are operator, station, hunt group,
Attendant Features
Station Setup Features
10:50
Page 1
user name
 aFwd
Station Feat Setup
Page 2
 ChkO
26 May 2007 Company xyz
station number
[sSet]
Chrg
DND HotD
message is displayed.
BUSY
235 T200M Series User Guide (Coral IPx / FlexiCom)
tSet
HotI
is pressed, and no digits
SPKR