Tadiran Telecom T200M Series User Manual page 73

[aRS]
Attendant Room Status (or Attendant Canned Messages) is relevant for Attendant Console only. Use the
Attendant Room Status feature to toggle the room status definition (or canned message) of any station on or
off. See Room Status on page 229
[bFwd]
Boss Group: Call Forward enables you to define the conditions under which incoming calls to your Boss
Group are forwarded to another destination. See
[aFwd]
Attendant Call Forward is relevant for Attendant Console only. Used by the attendant to program stations,
Boss Groups and ACD/UCD Groups so that incoming calls ring at another destination. See
.
page 223
[Chrg]
Call Charge is relevant for Attendant Console only. This attendant feature shows the charges accumulated
per station. The attendant may reset and print the Charge Table content. See
[sSet]
Station Setup is relevant for Attendant Console only. Station Setup allows the attendant to define stations for
specific feature activation. See
[tSet]
Trunk Setup is relevant for Attendant Console only. Trunk Setup allows the attendant to define trunks for
specific feature activation. See
[Sys]
System Setup is relevant for Attendant Console only. System features (time, public library, etc) can be edited
from this menu. See
Operating the Phone
During Idle
or Canned Messages on page 225
Station Setup Features on page 235
Trunk Setup Features on page 244
System Features on page 238
59
.
Boss Groups: Call Forwarding on page 78
.
.
.
T200M Series User Guide (Coral IPx / FlexiCom)
.
Call Forward on
Call Charge on page 233 .