OR
•
Disconnect to automatically transfer the call (unscreened transfer).
If the 3rd party is busy or does not answer, the call will return to you with the relevant BUSY or NO
ANSWER message.
Answer the return call, then either:
• Ask the calling party if they wish to transfer to another party.
• Hang up.
[Camp]
• Press
to automatically camp on to the station from which the call was transferred.
Transferring a held call:
Use transfer of a held call to connect an incoming call to the held party, such as when you have to locate someone for a caller.
[Xfer]
1. Press
or
XFER
2. Press the flashing DSS key associated with the held call.
3. Press
or hang up to transfer the call.
SPKR
Station Telephony Features
Transfer (Xfer)
NANS
station unanswered #
NO ANSWER unanswered #
DND
Mute
Station does not answer
SBSY
busy station #
BUSY
busy #
DND
Mute
Station is busy
. While the party is being held, dial a destination number.
original #
FwdA
Num
original #
FwdA
Num
207
T200M Series User Guide (Coral IPx / FlexiCom)
Need help?
Do you have a question about the T200M Series and is the answer not in the manual?
Questions and answers