Ring Adjustment - Tadiran Telecom T200M Series User Manual

Ring Adjustment

The phone ring volume can be changed from idle, or by using the volume key while the phone is ringing. You can
use this to change the ring of two different telephones in the same room. Also note that the Message Lamp lights in
beat with the ring while the phone is ringing.
.
CAUTION!
The Ringer is disabled and the phone cannot receive calls when DND or Call Forward All is activated.
Adjusting the ring volume level while ringing:
Press the up (+) or down (-) volume key. The ring volume level ranges from 0 (MIN ring) to 9 (MAX ring).
Adjusting the ring level from idle:
1. Press and hold OK
2. Choose Ring Volume.
3. Adjust volume using the volume key (see
4. Press [Save].
Adjusting the ring type:
Used to adjust the ring type of your phone in order to distinguish between incoming internal, external and voice page
1. Press and hold OK
2. Choose Ring Type.
3. Choose Internal, External or Voice Page.
4. Adjust ring type as described in
Operating the Phone
Ring Adjustment
and choose [Userdef].
Volume Adjustment on page
and choose [Userdef].
"Ring Type" on page 259
32).
.
33 T200M Series User Guide (Coral IPx / FlexiCom)