Canned Messages - Tadiran Telecom T200M Series User Manual

Canned Messages

This feature allows you to set one of up to 16 available canned messages for your station. Any internal caller to your station
sees this message displayed on the second line of their display panel until you answer the call.
Canned message texts are pre-programmed by your system adminitrator. They can be used to indicate your status (or any
other pertinent information) to the calling party. Contact your system administrator for the list of canned message texts used in
your organization. Use the
NOTE! Check with your system administrator whether your Coral system supports the Canned Messages
or Room Status feature. If your Coral system supports the Room Status feature (see
the Canned Message feature is unavailable.
[Room]
Press to access the Canned Messages options.
[RSx]
Press the required Canned Message soft key (
canned message appears on the top line. When activated, a bullet is shown next to
To cancel, press the relevant lit
NOTE! The first canned message that you activated is the one that appears on the internal caller's
display panel. Therefore, to set a new message ensure that you cancel all previous messages.
Station Telephony Features
Canned Messages
to list the canned messages available at your telephone.
Table on page 95
10:50
Page 1
 COS
Room Status
Page 2
 RS0
 [RSx]
26 May 2007 Company xyz
user name station number
fSet Trc
RS1 RS2
[RSx]
where x= 0 to 15, see
key again.
94 T200M Series User Guide (Coral IPx / FlexiCom)
page 194),
[Room]
RS3
Table on page 95 ) to activate. The

[RSx]
, and next to

[Room]
.