Touch-Tone Dialing (Dtmf) For Other Common Carriers (Occ) - Tadiran Telecom T200M Series User Manual

Touch-Tone Dialing (DTMF) for Other Common Carriers (OCC)

Enables you to send DTMF tones using the dial pad over non-DTMF trunks and stations during any call (phone to trunk,
phone to phone, 3-Way Conference, Meet-Me Conference, etc.). In this way you can control any device (such as Voice Mail,
IVR, start/stop recording a call, etc.) requiring DTMF response.
The party information is displayed on the top line. The digits are displayed on the second line as they are dialed and the
corresponding DTMF tones are heard by all parties to the call.
NOTE! phones
DTMF trunks and stations.
The OCC feature is an on/off toggle switch. Press
Activating using soft keys:
[OCC]
1. Press .
2. Dial the required digits.
Activating using preprogrammed key:
1. Press the preprogrammed
2. Dial the required digits.
NOTE! To learn how to program a key, see
Station Telephony Features
Touch-Tone Dialing (DTMF) for Other Common Carriers (OCC)
defined with Auto Transfer must use this feature even when sending DTMF tones to
ANSWER party info
DIAL 123456...
[OCC]

[OCC]
OCC key.
once to activate DTMF mode; press again to return to normal mode.
page 175. To program an OCC key, use feature code #127.
205 T200M Series User Guide (Coral IPx / FlexiCom)