Headset Only - Tadiran Telecom T200M Series User Manual

Headset Only

The feature is designed for users operating in Headset mode. It is of particular value at information centers where the headset
option is the most efficient way of communication. When Headset Only is set, calls are conducted via the headset and disables
the handset and the phone's microphone and loudspeaker, along with features that use these devices, such as voice page, etc.
Calls are conducted via the headset even if the cradle switch is on-hook, enabling a user to make full use of the hands-free
operation.
NOTES! When utilizing Headset Only feature:
• The SPKR
administrator.
• The phone can be set for Zip Tone mode. This mode is used to sound the ring tones directly through the
headset, rather than through the speaker. (For Zip Tone setup, see page 261)
• Refer to page 29
To activate Headset Only:
• HEADSET
Press
A bullet appears to the left of
To disable Headset Only:
• HEADSET
Press the lit
Station Telephony Features
Headset Only
key should be programmed as an ON/OFF (connect/release) key. See your system
for instructions on operating a
[fSet] [Head]
or
[Head]
and HEADSET
[fSet]  [Head]
or
phone programmed as Headset Only.
LED is lit green.
136 T200M Series User Guide (Coral IPx / FlexiCom)