Redial - Tadiran Telecom T200M Series User Manual

Redial

Redialing options are accessed by pressing
[Last]
Last Number Redial is used to redial the last number (most recent number) dialed from this phone. You can
also press REDIAL
[Save]
Saved Number Redial is used to redial an outside number that you have stored in memory.
A number can be saved during a conversation, when you hear a busy tone, or when the dialed number is not
answered by choosing
NOTE! As opposed to Last Number Redial, the saved number will remain in memory until another
number is saved by repeating the above procedure.
[ARdl]
Auto Redial is used to repeatedly redial an outside number that is busy. More than one number can be stored
in the Auto Redial list. A number can be entered for auto redialing either when you hear the busy tone when
making an external call (see
Hearing Ringback Tone on page 48)
will be redialed until the external phone rings, or up to a system-defined number of attempts, before the
number is erased from the Auto Redial list.
Station Telephony Features
Redial
[Redl]
from idle state.
10:50
Page 1
user name
 DND
Redial Numbers
Page 2

Last
to redial the most recent number.
[Save]
.
Upon Hearing Busy Tone on page 50)
, or from idle before making an external call (see
26 May 2007 Company xyz
station number
[Redl]
FlxC
Save ARdl
, or upon hearing ringback (see
188 T200M Series User Guide (Coral IPx / FlexiCom)
PgQ
). The number
below
Upon