Tadiran Telecom T200M Series User Manual page 64

Upon Hearing Busy Tone
After dialing an external destination, the following features appear on your phone display when you hear a busy tone. Hang
up and dial later or press the nearby soft key to activate the required feature.
[Msg.]
or MSG
Leave Message is used when dialing network destinations and not external destinations.
Use this feature to leave a "message" at a busy station. This feature lights the message waiting lamp at the
called party's station indicating that a message was left, and it leaves a simple message such as
on the destination station's keyset display. See
[Camp]
Camp On, also known as Call Back. Used only when dialing network destinations and not external
destinations. When the network station is busy, you may request that the system automatically call you back
when the required destination number is available. See
[ARdl]
Auto Redial is used to have the system automatically redial the unanswered destination. Further redial
options are available after activation (see
[Save]
Save Number is used to save the dial number of the busy destination. The saved number can then be redialed
by pressing
NOTE! The saved number will remain in memory until another number is saved by repeating the above
procedure.
Operating the Phone
Making External Calls
OUT trunk line
USER BUSY
 Msg.
Camp
[Redl] [Save]
from idle (see
Redial on page 188)
Mute Elps
Messages: Options on page 149
Calls Waiting: Receiving on page 89
Redial on page 188) .
.
50 T200M Series User Guide (Coral IPx / FlexiCom)
CALL SUSAN
.
.