Auto Set Relocate: Temporary - Tadiran Telecom FlexSet 280S User Manual

Auto Set Relocate: Temporary

When defined for temporary relocation, this feature allows a temporary move of your extension from one location to
another, while preserving your extension's original setup. The Auto Set Relocate function enables you to access
customized features of your FlexSet from another FlexSet. By activating the feature you can relocate all of your
(source) phone's programmable keys, numbering, membership in groups, etc. to another (destination) phone located
elsewhere within the same Coral system. As this takes place, the source phone acquires the full profile of the
destination phone, and vice versa.
The Auto Set Relocate is activated at the destination station. The temporary phone swap is automatically reversed at
midnight. Reactivating Auto Set Relocate at the already swapped destination station causes:
•
Automatic cancellation of the first relocation
•
Exchange of the new (third user's) phone profile with the destination phone profile
Activating from the Destination (new) location
1. Press [Setup] [MoveSt] or [AcdUcd] [MoveSt].
2. Dial your (source) station number.
3. Dial your (source) passcode (4 digits).
4. To activate, enter Activation Code (#11).
5. The station now initializes with the source profile.
Canceling from the Destination (new) location
1. Press [Setup] [MoveSt] or [AcdUcd] [MoveSt].
2. Dial your (source) station number.
3. Dial your (source) passcode (4 digits).
4. To cancel, enter Cancellation Code (#10).
5. The station now initializes with its original profile.
Station Features
Auto Set Relocate: Temporary
58 FlexSet 120S/280S User Guide