Using The Telephony Features - Tadiran Telecom T200M Series User Manual

Using the Telephony Features

You do not have to memorize any access codes to activate any of the rich array of Coral system telephony features.
Each state change in the phone (such as from idle to ring, ring to answer, answer to transfer, etc.) causes the associated state-
related features to appear on the display panel. Simply choose the feature you would like to activate by pressing its associated
soft key. When the feature is activated, a bullet appears next to the feature. As shown below, while in Idle mode when DND
(Do Not Disturb) is off, no bullet appears next to DND. When DND is activated, a bullet is displayed next to DND.
NOTE! Figures depicting the various display panel (4-soft key) options appear throughout this guide.
Where a list, menu or sub-menu continues through several lines, these are indicated as Page 1,
Page 2, etc. The location of the soft key options that appear in the figures in this guide may differ
from their actual locations on your phone.
Several telephony features are toggle switches. Therefore, the first time you press a feature's soft key, the feature is activated
or turned on. The second time you press the same feature's soft key, the feature is canceled or turns off automatically.
See Index: Soft Keys and Feature Codes on page 280
Operating the Phone
Using the Telephony Features
10:50
Page 1
user name
 DND
Page 2
user name
 DND
for an alphabetic list of all available feature options.
26 May 2007 Company xyz
station number
FlxC Redl
DND OFF
*DND*
station number
FlxC Redl
DND ON
23 T200M Series User Guide (Coral IPx / FlexiCom)
PgQ
PgQ