Tadiran Telecom T200M Series User Manual page 63

[Flsh]
Flash on Trunk is used to send a signal through the system to trunk lines in order to operate certain types of
features that are available on the second system. The second system is a telephone switching center, PABX or
another Coral system. This feature is also known as Calibrated Opening.
[Num]
Number is used to briefly display the trunk dial number instead of the name.
[Park]
Not used during ringback.
[Stop]
Stop Dialing is not used during ringback. Press this key before you hear ringback tone, in order to notify the
system when dialing out has been completed. In response the system sends your call immediately towards the
destination without waiting inter-digit time out.
[OCC]
OCC is used for users connected with pulse trunks and/or for when your phone is defined with Auto
Transfer. This feature enables you to send touch-tone dialing (DTMF tones) over non-DTMF trunks or
stations for applications or services (such as Voice Mail) requiring DTMF tones. See
(DTMF) for Other Common Carriers (OCC) on page 205
[Ser]
Not used during ringback.
[Camp]
Camp On, also known as Call Back. When a network station does not answer, you may request that the
system automatically call you back when the required destination number is available. See
Receiving on page 89
Operating the Phone
Making External Calls
.
49
.
T200M Series User Guide (Coral IPx / FlexiCom)
Touch-Tone Dialing
Calls Waiting: