Group Calls: Preset Conference Activation - Tadiran Telecom T200M Series User Manual

Group Calls: Preset Conference Activation

Preset Group Calls are comprised of a number of specified members whose stations ring simultaneously when an assigned
Group Call number is dialled. This feature allows a conference initiator to contact all the registered members by pressing one
button. The maximum number of participants is 100, depending on the system configuration.
Calling a Preset Group:
1. Press the preprogrammed Group Call DSS key, or dial the Group Call access code.
See
Programming: Feature Keys
2. All the member stations start ringing.
3. Wait for members to join.
NOTE! You will hear a warning tone every time a member answers (if defined system-wide).
4. Start speaking when the
non-answered stations have stopped ringing).
5. If none of the member stations answered, the
NOTE! For Group Call access code, see the table on
Station Telephony Features
Group Calls: Preset Conference Activation
on for instructions on how to program a DSS key.
page 175
message appears momentarily on the display (the message indicates that all
CONF COMPLETED
NO ANSWER
message appears.
page 125.
127 T200M Series User Guide (Coral IPx / FlexiCom)