Canned Messages - Tadiran Telecom T200M Series User Manual

Canned Messages

The Canned Messages feature is used to set a canned message for other stations. The attendant may set individual stations
with any one of 16 canned messages so that internal callers to the station see the message displayed on the second line of their
display panel until the call is answered.
Canned Messages can also be set directly from a user station, without attendant involvement (see
Canned message texts are pre-programmed by your system adminitrator. They can be used to indicate the station's status (or
any other pertinent information) to the calling party. Contact your system administrator for the list of canned message texts
used in your organization. Use the
NOTE! Check with your system administrator whether your Coral system supports the Canned Messages
or Room Status feature. If your Coral system supports the Room Status feature (see
the Canned Message feature is unavailable.
[aRS]
Press to access the Canned Messages options.
[RSx]
Canned Message x (where x= 0 to 15, see
Attendant Features
Canned Messages
Table on page 227
10:50
Page 1
user name
 Room
Attendant: Room Status
Page 2
 RS0
to list the canned messages available.
26 May 2007 Company xyz
station number
[aRS]
bFwd
RS1 RS2
).
Table on page 227
225 T200M Series User Guide (Coral IPx / FlexiCom)
).
page 94
page 229),
aFwd
RS3