Tadiran Telecom T200M Series User Manual page 256

5. Press
SPKR
The following table defines the special codes that may be used as part of the outside number.
Codes
*x Delay dialing by X seconds (x = 1 to 9)
#0 Stop dial (end of outside or network number)
#1 Outpulsing wait period during which user is able to dial any number of digits
#2 All digits following will be Dial Pulse
#3 All digits following will be Touch-Tone Dialing (DTMF)
#4 Inhibits display (for Call Accounting System and key set display)
#5 Enables display (for Call Accounting System and key set display)
#6 Wait for second dial tone
a Caller ID Restriction Implementation. Restrict the presentation of the caller phone number from appearing
#71
on the display of the called external party (as well as internal party, depending on system-wide settings).
a Enables displaying Caller ID number
#72
#8 Display '_' (for Call Accounting System and key set display)
#9 Calibrated Opening on trunk (FlashTk)
** Dial * out
## Dial # out
a. Enter the feature code #71 or #72 before the dial number.
Attendant Features
System Features
[Exit]
or to terminate.
Description
242 T200M Series User Guide (Coral IPx / FlexiCom)