Tadiran Telecom T200M Series User Manual page 65

During a Call
The following features are available during an external call:
[PgQ]
Page Queue places your call on hold by sending it to one of ten Page Queue destinations. You are then free to
page all the system members from your phone and announce that there is a call for Mr. Doe on a specific Page
Queue Line. The call can be picked up from any system station. See
[Xfer]
Transfer passes your call to another specified destination. Pressing
a number (internal or external). Disconnect to transfer the call, or first announce the call and then disconnect.
See Transfer (Xfer) on page 206
[ARdl]
Auto Redial is used for outgoing calls only. Use Auto Redial to have the system automatically redial the
unanswered destination. Further redial options are available after activation. See
[Hold]
Hold places the active call on hold. See
[Mute]
or MUTE Mute can be activated during a conversation to mute your side of the conversation (handset, headset and
speakerphone). When this feature is activated by the
appears to the left of
your speakerphone and handset or headset. Press the toggle key again to reactivate the microphone.
(see Mute Microphone on page
[Elps]
Elapsed Time toggle feature is used to view or cancel the call duration in HH:MM:SS format up to 13 hours
(12:59:59). See
Operating the Phone
Making External Calls
EXT ANS trunk line
DIAL outside telephone number
 PgQ
Xfer
.
Hold on page 139
[Mute]
and MUTE
163).
.
Setup on page 249
Hold Mute
Page Queue on page 164
[Xfer]
.
[Mute]
or MUTE
LED is lit red. The mute feature deactivates the microphone for
51 T200M Series User Guide (Coral IPx / FlexiCom)
.
places the called party on hold. Dial
Redial on page 188
on/off toggle switch, a bullet
.