Using the Speakerphone or Headset
The phone is equipped with a speaker so that it can operate as a speakerphone. This enables you to converse without lifting
the handset. Pressing the speakerphone
(SPKR
)
key automatically switches on the microphone and speaker. All dialing
or conversation is automatically hands-free; the handset remains on the cradle.
There are, however, several ways of using the
key, such as: in conjunction with a headset, or when
is
SPKR
SPKR
[S/HS]
programmed for on/off operation, and using the
(Speaker/Handset) soft key to switch between the handset and the
speaker.
Hands-Free Conversation
With handset on cradle:
When the handset is on the cradle and
flashes, you can speak hands-free by pressing the flashing
SPKR
SPKR
key or by using one of the methods described in
Adjusting the ring type: on page 33
.
Switchover from speakerphone to handset:
When you are using the speakerphone and want to use the handset for private conversation, lift the handset. The
SPKR
key LED will go off.
Switchover from handset to speakerphone:
When you are using the handset and want to use the speakerphone, first press
. When the
key LED is
SPKR
SPKR
lit, replace the handset on the cradle.
Disconnecting calls:
Either press the lit
key when the handset is on the cradle or replace the handset onto the cradle when the
SPKR
key LED is off.
SPKR
Call monitoring (when programmed for combined audio):
When you are using the handset and wish to activate the speaker for group listening, press
. When the LED is lit,
SPKR
the combined audio is active. To return to private conversation, press
again. The LED will go off.
SPKR
Operating the Phone
27
T200M Series User Guide (Coral IPx / FlexiCom)
Using the Speakerphone or Headset
Need help?
Do you have a question about the T200M Series and is the answer not in the manual?
Questions and answers