Redial - Tadiran Telecom FlexSet 280S User Manual

Redial

Redialing options are accessed by pressing [Redial] from idle state.
10:50 26 May 2004 site name
user name
Redial Page_Q
Redial Numbers
Last# Saved#
[Last#] Last Number Redial is used to redial the last number dialed from this FlexSet. You can also press the
asterisk key (*) from the dial pad to redial the most recent number.
[Saved#] Saved Number Redial is used to redial an outside number that you have stored in memory.
A number can be saved during a conversation, when you hear a busy tone, or when the dialed number is
not answered by choosing [Save#].
NOTE:
[AutRdl]
Auto Redial is used to repeatedly redial an outside number that is busy. More than one number can be
stored in the Auto Redial list. A number can be entered for auto redialing either when you hear the busy
tone when making an external call (see page 37), or upon hearing ringback (see page 35), or from idle
before making and external call (see below). The number will be redialed until the external phone rings,
or up to a system-defined number of attempts, before the number is erased from the Auto Redial list.
Station Features
Redial
station number
Hold Remind
AutRdl
As opposed to Last Number Redial, the saved number will remain in memory until another
number is saved by repeating the above procedure.
10:50 26 May 2004 site name
PickUp DND
Redial Numbers
Last#
149
user name station
Music Redial
Saved# AutRdl
FlexSet 120S/280S User Guide
Page 1
Page 2