Table of Contents
Advertisement
Kollmorgen
2.10.6
Permissible ambient temperatures, ventilation, mounting position
Storage hints
Transport hints
Supply voltage tolerances
Ambient temperature in operation
Humidity in operation
Site altitude
Pollution level
Enclosure protection
Mounting position
Ventilation 1 A and 3 A types
Make sure that there is sufficient forced ventilation within the control cabinet.
* order code reference see p. 101
2.10.7
Conductor cross-sections
Observe the technical data for cables on page 35.
Following EN 60204, we recommend for single-axis systems:
AC connection
DC bus link
Regen resistor
Motor cables up to 25 m*
Motor cables 25m to 50 m*,
with motor choke 3YLNxx
Resolver, motor thermostat
Encoder, motor thermostat
Setpoints, AGND
Control signals, BTB, DGND 0.5 mm²
Holding brake (motor)
+24 V / DGND
For multi-axis systems, observe the specific operating conditions for your system
* Danaher Motion North America supplies cables up to 39 meters
*
Danaher Motion Europe supplies cables up to max. length
2.10.8
LED display
A 3-character LED display indicates the status of the amplifier after switching on the 24V
supply (ð p.71). When the keys on the front panel are used, the parameter and function
numbers are shown, as well as the numbers for any errors that may occur (ð p.72).
®
SERVOSTAR
300 Installation Manual
Supply input
Auxiliary supply
without brake and fan
with brake or fan
all other types
12/05
ð p.95
ð p.95
303-310*:
341-346*:
20 V DC ... 30 V DC
24 V DC (-0% +15%)
0...+40°C under rated conditions
+40...+55°C with power derating 2.5% / °C
rel. humidity 85%, no condensation
up to 1000 meters a.m.s.l. without restriction
1000...2500 meters a.m.s.l. with power derating
1.5% / 100meters
Pollution level 2 as per IEC 60664-1, 2.5.1
IP 20
vertical ð p.29
natural convection
built-on fan
1.5 mm²
600V, 105°C
1000V, 105°C,
1.5 mm²
shielded for lengths >20cm
600V, 105°C, shielded,
1 - 1.5 mm²
capacitance <150pF/meter
600V,105°C, shielded,
1 mm²
capacitance <150pF/meter
4x2x0,25 mm² twisted pairs, shielded, max.100m*,
capacitance <120pF/m
7x2x0.25 mm² twisted pairs, shielded, max.50m*,
capacitance <120pF/m
0.25 mm² , twisted pairs, shielded
min. 0.75 mm², 600V, 105°C, shielded, check voltage drop
max. 2.5 mm², check voltage drop
Technical description
+10%
1x110V
...1x230V
-10%
+10%
3x110V
...3x230V
-10%
+10%
3x208V
- 3x 480V
-10%
, 50/60 Hz
, 50/60 Hz
, 50/60 Hz
21
Advertisement
Table of Contents
