Notes On Connection Technology; Shielding Connection To The Front Panel - Danaher Motion Kollmorgen SERVOSTAR 300 Series Assembly, Installation, Setup

Installation
3.4.3

Notes on connection technology

3.4.3.1

Shielding connection to the front panel

34
12/05
SERVOSTAR
Kollmorgen
Remove the outside shroud of the
cable and the shielding braid on the
desired core length. Secure the co-
res with a cable tie.
Remove the outside shroud of the
line on a length from for instance
30mm without damaging the shiel-
ding braid.
Pull a cable tie by the slot in the
shielding rail on the front panel of
the servo amplifier.
Press the shielding of the cable
firmly against the front panel with
the cable tie.
®
300 Installation Manual