Acuro Encoder, Biss Interface (X1) - Danaher Motion Kollmorgen SERVOSTAR 300 Series Assembly, Installation, Setup

Kollmorgen
4.5.5

ACURO encoder, BISS interface (X1)

As an option, our servomotors can be fitted with a single-turn or multi-turn ACURO enco-
der with BISS interface.
The encoder is used by the SERVOSTAR 300 as a feedback device for drive tasks that
require highly precise positioning or extremely smooth running.
The thermostat contact in the motor is connected via the encoder cable to X1 and evalua-
ted there.
If lead lengths of more than 50m are planned, please consult our customer service.
®
SERVOSTAR 300 Installation Manual
12/05
SERVOSTAR 300
SubD 15
round, 17-pin
Interfaces
47