Comcoder (X1) - Danaher Motion Kollmorgen SERVOSTAR 300 Series Assembly, Installation, Setup

Interfaces
4.5.2

Comcoder (X1)

As an option our motors can be equipped with a ComCoder as feedback unit. For the
commutation hall sensors are used and for the resolution an incremental encoder.
The thermostat contact in the motor is connected via the ComCoder cable to X1 and
evaluated there.
If cable lengths of more than 25m are planned, please consult our customer service.
Frequency limit (A,B): 350 kHz
44
12/05
SubD15
SERVOSTAR 300
round, 17 pin
®
SERVOSTAR 300 Installation Manual
Kollmorgen