Table of Contents
Advertisement
Interfaces
4.12.4.2
Control circuit
The example shows a circuit diagram with two separated work areas connected to one
emergency stop circuit. For each work area individually "safe stop" of the drives is swit-
ched by a protective screen.
The safety switchgears used in the example are manufactured by Pilz and fulfill at least
the safety category 3 according to DIN 954-1. Further information to the safety switchge-
ars is available from Pilz. The use of safety switchgears of other manufacturers is possi-
ble, if these also fulfill the safety category 3 according to DIN 954-1.
Consider the wiring instructions on page 61.
64
12/05
Safe stop acc. to EN954-1 category 3 for 3 drives
Safe stop acc. to EN 954-1 category 3 for 2 drives
SERVOSTAR
Kollmorgen
Emergency-stop circuit acc.
to EN 954-1 category 4
®
300 Installation Manual
Advertisement
Table of Contents
