Incremental Or Sine Encoder With Hall Sensors (X1) - Danaher Motion Kollmorgen SERVOSTAR 300 Series Assembly, Installation, Setup

Kollmorgen
4.5.3

Incremental or sine encoder with hall sensors (X1)

Feedback devices (incremental or sine-cosine), which don't deliver an absolute informa-
tion for commutation, can be used as complete feedback system combined with an addi-
tional Hall encoder. All signals are connected to X1.
If cable lengths of more than 25m are planned, please consult our customer service.
Frequency limit (A,B): 350 kHz
®
SERVOSTAR 300 Installation Manual
SubD15
SERVOSTAR 300
12/05
Interfaces
45