Table of Contents
Advertisement
Kollmorgen
2.6
Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.
Danaher Motion GmbH
Wacholderstr. 40-42
D-40489 Düsseldorf
www.DanaherMotion.com
Typenbezeichnung
Spannungsversorgung
Umgebungstemp.
Ambient temp.
Ambient temperature
2.7
Instrument description
2.7.1
Package supplied
When you order an amplifier from the SERVOSTAR 300 series (order numbers ð p.101),
you will receive:
—
—
The mating SubD connectors are not part of the package!
—
—
—
Accessories : (must be ordered separately, if required)
—
—
—
—
—
—
—
®
SERVOSTAR
300 Installation Manual
Servo amplifier type
Customer Support
Europe
Italy
North America
Model Number
Power Supply
008102106842
Electrical supply
Installed load
SERVOSTAR 3xx
mating connectors X0, X3, X4, X8, X9 (only with SERVOSTAR 303-310)
Assembly, Installation and Setup instructions
Online documentation on CD-ROM
Setup software DRIVEGUI.EXE on CD-ROM
synchronous servomotor (linear or rotary)
motor cable (prefabricated), or both power connectors separately,
with the motor cable as a cut-off length
feedback cable (prefabricated)
or both feedback connectors separately, with the feedback cable as a cut-off length
motor choke 3YLNxx (ð p.93), for motor cables longer than 25 meters
external regen resistor (ð p.92)
communication cable to the PC (ð p.59) for setting parameters from a PC
power cable, control cables, fieldbus cables (as cut-off lengths)
12/05
Serial number
Tel. +49 (0)203 / 99790
Tel. + 9 (0)
3
36
2 /
594260
Tel. + ( 15) 226 2222
1 8
-
Ser. Nr
Nennstrom
Nom. Current
Output current
in S1 operation
Technical description
Expansion card
and options
U L
C
US
®
E217428
LISTED
IND. CONT. EQ.
1VD4
Ser. No.
Bemerkung
Schutzart
5.76
Enclosure protection
Comment
Encl.Rating
13
Advertisement
Table of Contents
