Feedback; Resolver X2 - Danaher Motion Kollmorgen SERVOSTAR 300 Series Assembly, Installation, Setup

Kollmorgen
4.5

Feedback

Feedback system
Resolver
ComCoder
Incremental or sine Encoder
with Hall
Encoder with EnDat/HIPERFACE
ACURO Encoder
Encoder without Data channel
Incremental encoder (A quad B)
4.5.1
Resolver (X2)
Our rotatory servomotors are fitted as standard with 2-pole hollow-shaft resolvers. It is
possible to connect resolvers with 2 to 36 poles to SERVOSTAR 300. The thermostat
contact in the motor is connected via the resolver cable to X2 and evaluated there.
If cable lengths of more than 100 meters are planned, please contact our customer ser-
vice.
®
SERVOSTAR 300 Installation Manual
12/05
SubD 9
SERVOSTAR 300
Conn. See
X2 p. 43
X1 p. 44
X1 p. 45
X1 p. 46
X1 p. 47
X1 p. 49
X5 p. 48
round 12-pin
Interfaces
Remarks
2 to 36 poles
A, B, zero, Hall
A, B, zero, Hall or
Sine, Cosine, zero, Hall
Sine, cosine, clock, data
Data (BISS)
Sine, cosine, zero
A, B, zero
43