P-Ps32 Plain Stand - Nikon SMZ25 Instruction Manual

P-PS32 Plain Stand

5.4
The P-PS32 is a standard model stand without illumination
systems.
Combine this stand with an SMZ18 via a P2-FMDN Focus Mount.
This stand cannot be used in combination with an SMZ25.
This stand is equipped with a stage plate with black and milky
white surfaces. Select the surface appropriate for the sample.
The support pillar of the stand can be replaced with a long support
pillar. A dedicated screwdriver is stored in the upper part of the
support pillar.
 Attachable optional devices
The following devices can be attached to this stand:
•
P-SXY64 XY Stage
• Circular Floating Stage 2
•
C-SSL DIA Sliding Stage
•
P-DF2 LED Dark Field Unit 2
• C-TRS Tilting Stage
•
C-LSL2 LED Epi Illuminator 2 (via an SMZ-U Epi Arm)
•
C-FDF Flexible Double Arm Fiber Illumination Unit (via a C-FIDH Fiber Holder)
Screw holes for attaching optional devices
The base's top board has screw holes for attaching various
types of devices. Screw holes (2) to (4) are not penetrating
to prevent ingress of solution into the base.
(1)
2-M4: Positioned under the stage plate attachment
part of the base. Usable for multiple purposes.
(2) 4-M6: Positioned under the stage plate attachment
part of the base. Used for attaching the
P-SXY64 XY Stage.
(3)
2-M4: Positioned at the center on the top surface of
the base. Usable for multiple purposes.
(4) 4-M5: Positioned at the rear on the top surface of the
base. Used for attaching a device such as the
C-FDF Flexible Double Arm Fiber Illumination
Unit.
Chapter 8
Functions and Operations of the Devices
175
115
(2)
4-M6
Depth 8
Screw holes for attaching optional devices
102
Stage plate fixing screw
P-PS32 Plain Stand
20 100 20
150
80
(1)
2-M4
(4)
4-M5
Depth 7
(3)
2-M4
Depth 6