Assembling - Nikon SMZ25 Instruction Manual

Chapter
3

Assembling

This chapter contains the SMZ18/SMZ25 system configuration diagrams and lists of the system components, and explains
how to assemble the systems.
Before starting assembling, read the appropriate notes such as
product" at the beginning of this instruction manual and "3 Installation location" in "Notes on Handling the Product" in this
instruction manual.
CAUTION When moving or carrying the system
The SMZ18/SMZ25 system weighs over 20 kg in total.
When moving the assembled microscopy system, work with at least two people. Put hands in the depression at the front of the
base and the rear of both sides to lift up the system. Be very careful not to let fingers be caught when putting it down.
 Tools necessary for assembly
Tools
Hex wrench (nominal designation: 2.5)
Hex wrench (nominal designation: 3)
Hex wrench (nominal designation: 4)
Hex wrench (nominal designation: 5)
Hex wrench (nominal designation: 6)
Hex driver (nominal designation: 2)
Hex driver (nominal designation: 4)
Spanner wrench (nominal designation: 10)
CAUTION "11 Cautions on assembling and installing the
Devices that supply tools
Intelligent nosepiece, P-SXY64 XY Stage
P-SXY64 XY Stage
Fiber holder
P-SXY64 XY Stage
Focus unit
Focus unit, P-PS32 Plain Stand (fit-in type to the top of the support
pillar)
Intelligent nosepiece, Focus mount adapter, Focus mount
Fiber holder
19