P-Ps32 Plain Stand - Nikon SMZ25 Instruction Manual

P-PS32 Plain Stand

5.4
This stand consists of a microscope system with the SMZ18
Zooming Body attached with the P2-FMDN Focus Mount.
It is equipped with a stage plate having black and milky white
planes. Select the plane based on the sample being observed.
The stand support can be replaced with a long support. A special
screwdriver is stored in the upper part of the support.
Tap holes for attaching accessories
The base's top board has tap holes for attaching various
accessories. The tap holes are not penetrating to prevent
ingress of solution into the base.
(1)
2-M4: Positioned under the stage plate attachment
part of the base. Used for multiple purposes.
(2)
4-M6: Positioned under the stage plate attachment
part of the base. Used for attaching the
P-SXY64 XY Stage.
(3)
2-M4: Positioned at the center on the top surface of
the base. Used for multiple purposes.
(4) 4-M5: Positioned at the rear on the top surface of the
base. Used for attaching an accessory such as
the C-FDF Flexible Double Arm Fiber
Illumination Unit.
Chapter 4
Functions and Operations of the Devices
P-PS32 Plain Stand
175
115
(2)
4-M6
Depth 8
Tap holes for attaching accessories
49
20 100 20
(4)
4-M5
Depth 7
150
(3)
2-M4
Depth 6
80
(1)
2-M4