Attaching G-Ls To The Stand [C-Ps & C-Psc]; Arm For Halogen Illuminators - Nikon SMZ1000 Instruction Manual

lamp, handle it through a piece of cloth or through its packaging
until replacement is complete. If you get fingerprints on the lamp,
wipe gently with a piece of clean cloth dampened with alcohol.
Attaching G-LS to the stand [C-PS & C-PSC]
2
Set so that the protrusion on the lamp house
aligns with the inside of the screw hole on the
arm of the stand (screw hole for mounting
6V10W halogen illuminator) and secure it in
place from the outside of the arm using the
mounting screw.

Arm for halogen illuminators

3
It is possible to freely adjust the direction of illumination by using a
special arm.
1 G-EIA flexible arm [G-LS]
Set so that the protrusion on the lamp
house aligns with the inside of the hole
in the holder of the flexible arm and
secure it in place from the outside of the
holder using the mounting screw.
Secure by screwing the mounting screw
supplied with the arm into the arm
mounting screw hole in the stand (screw
hole for mounting an Epi-arm).
Illuminator
G-LS
Mounting
screw
Screw hole for
mounting 6V10W
halogen illuminator
G-LS
Protru-
sion
Arm
Holder Mounting screw
Flexible arm
Mounting screw
V
25