Nikon SMZ25 Instruction Manual page 59

 Cable clamp attachment
Four cable clamps and four fixing screws (pan-head M4-8 mm) are supplied with the P2-FMDN Focus Mount.
The cable clamps and the fixing screws are used for securely clamping the P2-RLYC Relay Cable or the fibers of the
P2-CIA Coaxial Epi Illuminator to the rear side of the P2-FMDN Focus Mount.
Put the cable or the fibers through cable clamps, and then install the cable clamps to the screw holes using fixing
screws. There are two screw holes on each rear right and rear left side of the P2-FMDN Focus Mount. Use two out
of the four holes or the four holes as shown in the figures depending on the product in use.
For the P2-RLYC Relay Cable: Use two cable clamps.
For the P2-CIA Coaxial Epi Illuminator: Use the four cable clamps.
Screw holes for fixing the cable clamps
The lower two out of the four screw holes on the rear side of the focus mount are also used for attaching the
P2-RLY Relay Box to the focus mount. (See [6].) If the relay box is planned to be used, do not put the cable
clamps.
Plastic cable clamp x4
Fixing screw x4
3
Attach a zooming body
Attach the SMZ18 Zooming Body to the focus mount.
(1) Completely loosen the two M5 hexagon socket
head bolts for the zooming body on the right side of
the zooming body (as viewed from the front) using
the hex driver (nominal designation: 4).
(2) Drop and fit the dovetail groove of the zooming body
onto the dovetail of the focus mount from the top.
(3) Remove the two rubber caps for the fixing bolt holes
on the right side of the focus mount (as viewed from
the front). Insert the hex driver (nominal
designation: 4) into a hole and firmly tighten the two
zooming body fixing bolts. After tightening the bolts,
put the rubber caps back onto the bolt holes.
4
Attach a coaxial epi illuminator. (for the compact/EPI system)
Attach the coaxial epi illuminator to the zooming body.
See "3.1 [6] Attach a coaxial epi illuminator. (for the EPI system)"
Chapter 3
Cable clamps
Clamping the
P2-RLYC Relay Cable
45
Assembling
Cable clamps
US
C
LIS TED
4N7 5 N
PEC TIO NT
INS UIP ME
EQ
SM Z
N
JA PA
IN
DE
MA
Clamping the fibers of the P2-CIA
Attaching the zooming body
by tightening the bolts
US
C
LIS TED
5
4N7 TIO N
PEC ME NT
INS UIP
EQ
SM Z
N
JA PA
IN
MA DE
Coaxial Epi Illuminator