WARNING Before connecting the power cord
To prevent electric shock, be sure to turn off the power switch (press it to the "" position) at the front of the control box
before connecting the power cord to the adapter.
12
Connect remote control devices. (P2-CTLA Control Box only)
Attach the following remote control devices to the P2-CTLA Control Box.
(1)
Connect the P2-RC Remote Controller.
Connect the P2-RC Remote Controller to the
connector "REMOTE" of the P2-CTLA Control Box.
(2)
Connect the AZ-FSW Foot Switch (optional).
Connect the AZ-FSW Foot Switch to the connector
"FOOT" of the P2-CTLA Control Box.
(3)
Connect the AZ-PCR Photo Release (optional).
Connect the AZ-PCR Photo Release to the
connector "PHOTO" of the AZ-FSW Foot Switch.
Chapter 3
Assembling
41
Connecting the control box
PHOTO
CTRL
Connecting the foot switch
Connecting the photo release
PHOTO
CTRL