Nikon SMZ25 Instruction Manual page 128

 Attachable optional devices
The following devices can be attached to this stand:
• P-SXY64 XY Stage
• C-SSL DIA Sliding Stage
• P-DF2 LED Dark Field Unit 2
• C-TRS Tilting Stage
• C-LSL2 LED Epi Illuminator 2 (via an SMZ-U Epi Arm)
• C-FDF Flexible Double Arm Fiber Illumination Unit (via a C-FIDH Fiber Holder)
• C-FID2 Double Arm Fiber Illuminator
• P2-POL Simple Polarizing Attachment
45-mm dia. filter
A 45-mm dia. filter (no thicker than 5 mm) can be dropped onto the filter dropping ring (attached to the base optical path
immediately under the glass plate).
Screw holes for attaching optional devices
The base's top board has screw holes for attaching various
devices. Screw holes (2) to (4) do not go right the way
through to prevent liquid penetrating into the base.
(1) 2-M4: Positioned under the stage plate attachment
part of the base. Usable for multiple
purposes. Used for attaching a C-TRS
Tilting Stage.
(2) 4-M6: Positioned under the stage plate attachment
part of the base. Used for attaching the
P-SXY64 XY Stage.
(3) 2-M4: Positioned at the center on the top surface
of the base. Usable for multiple purposes.
(4) 4-M5: Positioned at the rear on the top surface of
the base. Used for attaching a C-FDF
Flexible Double Arm Fiber Illumination Unit
(via a C-FIDH Fiber Holder).
Exchange for a C-EP support
The support pillar length is 145 mm longer than standard
when the original support pillar for this stand is exchanged
for a C-EP support. This is useful for attaching the focus
mount to a high position.
Chapter 8
Functions and Operations of the Devices
175
115
(2)
4-M6
Depth 8
Screw holes for attaching optional devices
114
20 100 20
(4)
4-M5
Depth 7
150
(3)
2-M4
Depth 6
80
(1)
2-M4