Nikon SMZ25 Instruction Manual page 52

8
Attach a tube.
Attach the tube to be used to the epi illuminator or epi fluorescence attachment.
The attachment procedure is the same for all tube types.
(1) Completely loosen the M4 set screw for the tube at
the top front of the illuminator using the hex driver
(nominal designation: 2).
(2) Align and fit the round dovetail at the bottom of the
tube to the round dovetail of the illuminator and
tighten the fixing screw.
9
Attach eyepieces.
Attach the eyepieces to the tube.
Two eyepieces with the same magnification are used.
Firmly insert the eyepiece until it contacts the end of the
tube sleeve.
Caution when attaching eyepieces
Pay attention when inserting a 10x eyepiece because a rubber cover is attached and the eyepiece end is not visible. To
prevent malfunction, hold the rubber cap when inserting the 10x eyepiece. Do not hold the diopter adjustment ring
when inserting it.
Chapter 3
Assembling
38
Loosening the tube fixing screw
Attaching the tube
Attaching the eyepiece