Nikon SMZ25 Instruction Manual page 58

2
Attach a focus mount.
Attach the P2-FMDN Focus Mount to the stand.
Insert the focus mount to the support pillar from the top
until it reaches the limit, and tighten the fixing knob on the
rear side.
 Focus mount orientation
Attach the focus mount so that it faces the front of the
stand as shown in the figure.
CAUTION
If the focus mount is attached in the incorrect
orientation, the stand may fall over. This may result in
damage to the device or unexpected injury. Do not
attach the focus mount if the focus mount does not
face the front of the stand as shown in the figure.
Chapter 3
Assembling
Attaching the focus mount by tightening the knob
44
Correct orientation of the focus mount
Incorrect focus mount orientation