Nikon SMZ25 Instruction Manual page 75

 Tube
Name Trinocular Tilting Tube
Model P2-TERG 100
Angle of 0 to 30° (continuously variable)
depression
Eyepiece By the optical path switching lever
mount/tube
mount
optical-path
switching
 Nosepiece, Focus mount adapter
Name Intelligent Nosepiece
Model P2-RNI2
• A double-hole nosepiece that can hold two
Function
objectives so that the objectives are switched
during observation. It can be used as an adapter
to connect the zooming body and the focus unit.
• The stereoscopic view and vertical view can be
generated by shifting the objective position.
• Hold the SMZ18/25 Zooming Body using its front
dovetail.
• Attached to the focus unit or motorized focus unit
using the rear dovetail
Objective Dovetail
mount
with the objective anti-fall mechanism
Status detection Detect the objective mount address and the vertical
view state.
Detected information is sent to the control box via
signal cable.
 Objective
Name Objective
Model P2-SHR Plan Apo 0.5X
Magnification 0.5x
Numerical 0.078
aperture
(maximum)
Working 71 mm
distance
Parfocal 150 mm
distance
Exclusively-shaped
Objective mount
bayonet
Others Protection ring provided
Chapter 5
Specifications
Trinocular Tilting Tube
P2-TERG 50
0 to 30° (continuously variable)
By the optical path switching lever
Focus Mount Adapter
P2-FM
• Adapter to connect the zooming body and the focus
• Hold the SMZ18/25 Zooming Body using its front
• Attached to the focus unit or motorized focus unit
Objective
P2-SHR Plan Apo 1X
1x
0.156
60 mm
150 mm
Exclusively-shaped
bayonet
Correction glass
provided
61
Trinocular Tube L
P2-TL100
10°
By the optical path switching lever
unit
dovetail.
using the rear dovetail.
─
─
Objective
P2-SHR Plan Apo 1.6X
1.6x
0.25
30 mm
150 mm
Exclusively-shaped
bayonet
Objective
P2-SHR Plan Apo 2X
2x
0.312
20 mm
150 mm
Exclusively-shaped
bayonet
With a correction ring