Nikon SMZ25 Instruction Manual page 13

CAUTION
● The total mass of the microscope system is over
20 kg. When moving the system to another
location, temporarily separate the removable
devices and carry the system while firmly
holding the hand holding portions of the base,
with multiple persons. Do not lift the system
while holding the binocular part of the tube or
putting hands under the objective.
● Do not place this product in a locker or cabinet.
12 Cautions on sustained observations
To relieve fatigue resulting from long observation
sessions, limit continuous observations to one
hour. Take at least 10 to 15-minute breaks between
observation sessions. Adjust the layout of other
equipment used and the height of your chair.
13 Cautions on use, transportation, and storage
This product must be operated, transported, or
stored in accordance with the following conditions.
If you install the product in a location with high
temperature and high humidity, mold and/or
condensation may be generated on the lenses.
Furthermore, performance deterioration and
malfunction may occur.
● Operating conditions:
temperature: 0 to +40°C, humidity:
60% RH max. (no condensation)
● Transporting/storage conditions:
temperature: -20 to +60°C,
humidity: 90% RH max. (no
condensation)
14 Disinfection before transfer
Before sending the microscope to other locations
for repair or return, be sure to properly
decontaminate the microscope to avoid biohazard
risks.
15 Disposal of the microscope, accessories and
consumables
To avoid biohazard risks, dispose of the
microscope, accessories and a cloth used for
disinfection as contaminated waste, according to
the standard procedures for your facility.
To avoid exposure to biohazard, dispose of bases
(model: P2-PB, P2-DBL and P2-DBF) or stands
(model: P-PS32, P-DSL32 and P-DSF32) as
contaminated devices in accordance with the
standard procedures of your facility.
Safety Precautions
xi