Packing The Existing Light Engine - Christie Cinema 4K-RGB Service Manual

10. Remove the light engine from the projector.
11. Place the light engine on the light engine plate.
If you do not have the light engine plate, place the light engine on the front light engine cover.
12. Replace the light engine.
13. To re-install, follow these steps in reverse order.

Packing the existing light engine

Use the shipping brackets, shipping plate, and hardware from the light engine packaging to prepare
the existing light engine for return shipping.
1. Place the existing light engine onto the shipping base plate.
2. Tighten the three screws and attach the light engine to the base plate.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
75