5. Remove the three top screws and lower left screw securing the rear card cage security bracket.
Remove the lower right screw securing the rear card cage security bracket.
6. Remove the bracket.
7. Disconnect the diffuser harness (J135) from the diffuser interface board (DIB).
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
68